XP8710 Universal USB ICSP Programmer

6,500.00

Compare
Category:

Description

XP8710 Programmer
 Login to Download:  * Software Download        Device Support List        instruction manual
it can actually program more than 14100+ chips
1.1 Performance Introduction:
Well-designed cheap professional programmer, Production of high-density SMD technology, a
unified user interface, easy to use, fully functional, reliable program running of application
software, ultra-small code – runs faster, , it can automatically identify the operating system to
install and run under:
WIN 2000/XP/WIN 2003/WIN 2008/WIN VISTA/WIN7/WIN8/WIN10(32Bit/64Bit).
◆The programming speed is greatly improved . It is suitable for small batch production
and supports 4 programmers for one computer.
◆A wide range of chip support, the initial version supports the chip 15000+, supports
a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips,
microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12
PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test,
54/74 and CMOS4000 integrated circuit integrated functional test.
25 series Nor Flash capacity support to 128Mbits(Note: 32MB or larger capacity flash
chip cannot be programmed by general programmers because of
programming speed, while the XP8710 programmer can widely support
16MB Serial and parallel series of chips to 48PIN. It provides with the
remarkable quality that is distinct from other common programmer.)
◆Unique ultra-low power: The whole programmer is equipped with the ultra-low power chips
and it is furnished with electricity via USB Interface. It is the first comprehensive programmer to
program all the chips without an external power supply. Their own power consumption is less than
20mA (it is 7mA when the programmer is not programming, LED power indicator use largest
electricity, 5mA each one) and Programming power loss rate is less than 20% so that the
programmer can supply the high VCC VPP programming electric current. Programmable chip
can be provided with enough programming power (the largest programming power output is 2
watts that is impossible for a chip to use 2 watts of programming power). And you hardly feel the
heat of the programmer after such long continuous work. easily portable performance.
◆Programmable programming power supply: VPP and VCC programming voltages are
independently program-controlled: programmable VCC is from 3.3V to 6.5V; VPP is from 3.3V to
21V. The fluctuation of power supply is minor because of the multi-stage LC filter.
Best overvoltage,
◆overcurrent protection: VCC, VPP power supply of the Programmer is furnished with the
independent Grade 3 overcurrent protection and the protection of automatically cutting off power
supply. Each pin of 40-pin programming socket has VPP overvoltage protection. It can effectively
prevent from putting a chip in the wrong place or short circuit due to other reason. In this
programming case, it can also stop VPP high voltage from coming back to the internal of the
programmer and damaging the device. Really make sure that the programmer will not be damaged
when there is any worst-case short circuit. At the same time, the programmed chip can be
efficiently protected.
◆This programmer will cut off the programming power supply VPP and VCC within 100us and
send the message to the application program when there is short circuit. The programmer and PC
won’t be reset when there is short circuit because of the multilevel overcurrent protection.
◆Chip serial number secondary development functions: Programmer built a variety of
commonly used automatic numbering function. And can use a custom algorithm to achieve
any sequence number through DLL dynamic library. This feature allows you to produce
a unique identification information for each chip in mass production. The logo can also be
encrypted with a custom algorithm to more effectively protect your product’s rights.
◆Universal serial programming interface ICSP (to support high-voltage parallel
programming). Note: ICSP now supports ATMEL89S51,52, AVR ATMEGAxxx Full
Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series
of SYNCMOS SM59Dxx SM59Rxx full range chips for in-circuit serial programming.

Reviews

There are no reviews yet.

Be the first to review “XP8710 Universal USB ICSP Programmer”

Your email address will not be published. Required fields are marked *


Notice: Trying to access array offset on value of type bool in /home/u844851292/domains/icmasteronline.com/public_html/wp-content/plugins/premmerce-search/views/frontend/autocomplete-template.php on line 9

Notice: Trying to access array offset on value of type bool in /home/u844851292/domains/icmasteronline.com/public_html/wp-content/plugins/premmerce-search/views/frontend/autocomplete-template.php on line 21

Notice: Trying to access array offset on value of type bool in /home/u844851292/domains/icmasteronline.com/public_html/wp-content/plugins/premmerce-search/views/frontend/autocomplete-template.php on line 30
All search results
X