half-bridge load cell / internal use of a half bridge resistance strain gauge / range 50KG weigh sensor

Call for Price

Compare
Category:

Description

Size: 28mmX24mm

Internal 1000 Ohm half-bridge strain gauge load cell, range is 50kg, half-bridge structure.
When measuring, the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the middle, with a beam of white plastic cover arm) and the outside edges to form a shear force in the opposite direction, i.e., in the middle of strain beam bending necessary changes can occur under stress, strain beam side by another force can not have a barrier.

The sensor use the following three methods:

1. using a sensor with external resistors full bridge measurement range of a sensor range: 50kg. Higher requirements for external resistor
2. the use of only two full-bridge sensors measuring range is the range of the two sensors and: 50kgx2 = 100kg
3. the use of four full-bridge sensors measuring range is the range of four sensors and: 50kgx4 = 200kg

Difference Between Half Bridge and Full Bridge Load Cell

 MODEL HMD7003
 COMPREHENSIVE ERROR           0.3
 OUTPUT SENSITIVITY                mV/V 1.0
 NONLINEARITY                          %F.S. 0.2
 REPEATABILITY                          %F.S. 0.1
 HYSTERESIS                               %F.S. 0.2
 CREEP                               (30min) %F.S. 0.1
TEMP. EFFECT ON ZERO         %F.S/10ºC           0.3
TEMP. EFFECT ON OUTPUT  %F.S/10ºC           0.3
 ZERO OUTPUT                         mV/V          ±5% R.O
 INPUT RESISTANCE                       Ω 1000±10
 OUTPUT RESISTANCE                     Ω          1000±2
 INSULATION RESISTANCE                 Ω ≥2000
 EXCITATION VOLTAGE                V       10
OPERATION TEMP.  RANGE           ºC        -30~+80
 OVERLOAD CAPACITY                 %F.S.          150
CAPACITY 50kg
Body scale

Reviews

There are no reviews yet.

Be the first to review “half-bridge load cell / internal use of a half bridge resistance strain gauge / range 50KG weigh sensor”

Your email address will not be published. Required fields are marked *


Notice: Trying to access array offset on value of type bool in /home/u844851292/domains/icmasteronline.com/public_html/wp-content/plugins/premmerce-search/views/frontend/autocomplete-template.php on line 9

Notice: Trying to access array offset on value of type bool in /home/u844851292/domains/icmasteronline.com/public_html/wp-content/plugins/premmerce-search/views/frontend/autocomplete-template.php on line 21

Notice: Trying to access array offset on value of type bool in /home/u844851292/domains/icmasteronline.com/public_html/wp-content/plugins/premmerce-search/views/frontend/autocomplete-template.php on line 30
All search results
X